1. Bend easily and easy to install.
2. It is able to bear corrosion resistance and heat resistance
strongly, stainless steel materials can be used safely for years .
3. Outside is covered with stainless steel wire braided ,have high
bearing capacity.
4. Applied to repeated motion region in high-temperature areas,
good anti-fatigue performance.
5. Diameter and length,welded on the end of hose can be produced as
customer's requirement.a variety of end fitting configurations such
as threaded(both NPT and BSP);fixed and floating flanges(stainless
steel and carbon steel);welding neck connection and quick fittings.
Inner Core: Corrugated Stainless Steel
Flexible metal hose stainless steel core strengths are available in
304, 321 and 316L stainless steel
Stainless steel tubing formed into corrugations parallel to one
another
Helical / Convoluted option available upon request
Outer Core:Braided Stainless Steel Layers
Purchase corrugated core hose with no layers, single or double
braided
Flexible metal hose outer braid layers made from 304 stainless
steel
What is the condition of our metal flexible hose ?
Connection type | Flanged/threaded/quick coupling/welding |
Hose material | Ss304/ss316/ss321 |
Diameter | DN6-DN700 |
Pressure | 6bar-25bar |
Temperature | -196℃~+600℃ |
Length | According to your request |
Thickness | 5mm-20mm |
To properly design a metal hose assembly for a particular
application, the following design parameters must be determinde:
1. Temperature-----You should provide us information as the
temperature to which the assembly is exposed aproper fit.
2. Size-----The diameter of the connections in which the assembly
will be installed is needed to provide.
3. Media-----This is improtant since you must be sure that the
assembly's components are chemically compatible with the media
going through the hose as well as the environment in which the hose
is installed.
4. Pressure-----identify the internal pressure to which the
assembly will be exposed. This information isimportant to determine
if the assembly is strong enough for the application.
5. Indenify the necessary end fittings-----This is required since
fittings for the assembly must be chosen toproperly fit the mating connection.
What is the parameter of our metal flexible hose?
| Technical parameter of metal braided hose |
Nominal diameter DN | Inner diameter (mm) | Outer diameter | Minimum bending radius | Working pressure |
| Bellows | Braid mesh | Static | Dynamic | Single braid mesh | Double braid mesh |
| 8 | 8.8 | 13.2 | 14.4 | 50 | 110 | 15 | 20 |
| 10 | 11.7 | 16.5 | 17.7 | 65 | 145 | 185 | 20 |
| 15 | 13.5 | 19.5 | 21.1 | 80 | 180 | 18 | 20 |
| 20 | 20.0 | 27 | 28.6 | 120 | 270 | 10 | 15 |
| 25 | 27.0 | 34.5 | 36.1 | 160 | 360 | 6.3 | 10 |
| 32 | 32.0 | 40 | 41.6 | 175 | 400 | 4.0 | 6.3 |
| 40 | 39.6 | 52 | 53.6 | 225 | 510 | 4.0 | 6.3 |
| 50 | 49.7 | 62 | 63.6 | 280 | 640 | 3.0 | 5.0 |
| 65 | 61.2 | 80.2 | 81.8 | 410 | 915 | 3.0 | 5.0 |
| 80 | 79.0 | 96.3 | 97.9 | 486 | 1030 | 3.0 | 5.0 |
| 100 | 101.2 | 119.6 | 121.2 | 610 | 1340 | 2.5 | 4.0 |
| 125 | 124.1 | 145.3 | 146.9 | 700 | 1540 | 2.5 | 4.0 |
| 150 | 149.4 | 180.8 | 182.4 | 810 | 1780 | 2.5 | 4.0 |
| 200 | 176.0 | 240 | 243.2 | 1000 | 2000 | 2.5 | 4.0 |
| 250 | 248.0 | 290 | 294 | 1250 | 2500 | 2.5 | 4.0 |
| 300 | 298.0 | 350 | 354 | 1500 | 3000 | 1.6 | 2.5 |
| 350 | 347.0 | 400 | 404.8 | 1750 | 3500 | 1.6 | 2.5 |
| 400 | 397.6 | 460 | 464.8 | 2000 | 4000 | 1.6 | 2.5 |
